How to connect a Windows device to the internet

How to connect a Windows device to the internet

  1. Connect a keyboard to the device.
  2. Press CTRL + ALT + DEL on your keyboard.
    Alternatively, on a Surface Pro, press and release the Power and Volume down buttons:



  3. Press the Internet option in the bottom right of your screen:
    The screen you see may be black or blue, dependent on your device



  4. Select the name of the network you wish to connect to
  5. Press the Connect button:
    You may then be prompted to enter the password to the network



Once you have successfully connected to the network, it will move to the top of the dropdown with a Connected, secured message displayed just under the network name.

    • Related Articles

    • Connecting a Surface Pro or Dell computer to the internet

      Before you start: Ensure the device is powered on. Ensure you have a keyboard connected to the device. Alternatively, if you are using a Surface Pro, ensure the device is out of its case. Connecting the device to the internet: On the keyboard, press ...

    • Rapid Access network configuration requirements

      Whitelisting For the purpose of whitelisting, Rapid Global recommends whitelisting the following addresses: Host name Direction Protocol Port Number/Range *://*.rapidglobal.com/* Outbound TCP 80, 443 *://*.rapidinduct.com.au/* Outbound TCP 80, 443 ...

    • Client-supplied hardware requirements for the Rapid Access system

      The below details the minimum specifications for Windows-based computers to operate Rapid's Visitor Access System (VAS). Additionally, the below highlights any unsupported specifications. Supported specifications: Devices with any of these ...

    • Where do I find a site's induction requirements in Access?

      You can find a site's induction requirements within Sections 10 & 11 in the Access > Site Info module. Please follow the steps below on how to access this area: Go to the Access module. Enter the Site Info area. Select your site using the Location ...

    • How to register an iPad

      Follow this guide when you have just unboxed your iPad and are completing the initial setup of the device. Prerequisite: Before beginning, please ensure you have an active Apple Account. If you do not have one, you will be unable to complete the iPad ...